Linemaster Switch Corporation
29 Plaine Hill Road POB 238
Woodstock, CT 06281-0238 USA
Toll Free: (800) 974-3668 (US Only)   Telephone: (860) 974-1000    Fax: (860) 974-0691
E-Mail: service_266@linemaster.com    Web site: www.linemaster.com
All Categories > Hercules Heavy duty Foot Switch - Full Shield > Item # 577-DWH  


Image

Item # 577-DWH, Hercules Heavy duty Foot Switch - Full Shield

  • Rugged cast metal enclosure has sufficient weight to keep the switch from sliding when being operating
  • All models have a neoprene cover gasket plus O-rings on the activating shaft and a separate ground screw
  • In all maintained contact models the release is accomplished by simply pressing the latch with a light forward movement of the toe. The release is placed under the full shield so falling objects cannot easily release it
  • Oversize "O" and "OX" shield models accept oversized safety shoes and metatarsal foot guards. The "OX" shield has an additional 3/4inch (19.1 mm) opening height as compared to the "O" shield
  • Painted alert orange
  • single 3/4" -14 NPT threaded conduit entry is standard
  • 3 holes provided for rigid mounting to the floor or equipment






Specifications

Features
  • Driptight
  • Dusttight
  • Watertight
  • Oiltight

Stages
Single

Circuit
DPDT DB

Form
Z

Electrical Rating
Heavy pilot duty 250 Vac max.
15 A 125-250 VAC
1/2 H.P. 125 VAC
1 H.P. 250 VAC

Construction/Standards
NEMA Type 2, 4 & 13
UL Enclosure 2, 4 & 13
CSA Enclosure 2, 4 & 13
EN 60529 Degree of Protection IP56

Size
9 x 5 3/4 x 4 3/4 Inch

Weight Approx.
8 lbs

Remarks
DB Double break model must be wired to equal voltage sources and the same polarity. The loads should be on the same sides of the line.

Note
S-Denotes Momentary Contact-Press to start - release to stop, D-Denotes Maintained Contact-Press to start - Release Latch to stop.



Print Back